1 1/2" Diameter Heavy Duty Felt Pads - 144 Pcs (4 Pcs/Pad)

Black Friday 1 1/2" Diameter Heavy Duty Felt Pads - 144 Pcs (4 Pcs/Pad) 2011 Deals

Nov 22, 2011 08:44:10

Black Friday 1 1/2
Click for larger image and other views

1 1/2

>> Click here to update Black Friday prices for 1 1/2" Diameter Heavy Duty Felt Pads - 144 Pcs (4 Pcs/Pad) <<

Black Friday 1 1/2" Diameter Heavy Duty Felt Pads - 144 Pcs (4 Pcs/Pad) Feature

  • Made of 100% Polyester Felt
  • Self-adhesive
  • Protect hardwood floors, furniture and other surfaces from marks and scratches
  • Search for "Cleverbrand's Heavy Duty Felt Pads" on Amazon for more options


Black Friday 1 1/2" Diameter Heavy Duty Felt Pads - 144 Pcs (4 Pcs/Pad) Overview

Made of 100% polyester felt, Cleverbrand's non-abrasive Heavy Duty Felt Pads are suitable for protecting hardwood floors, furniture and other surfaces from marks and scratches. Each package consists of 144, 1 1/2" diameter felt pads. All pads are 3/16" thick with an adhesive backing and are readily placed on any surface for protection.



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday 1 1/2" Diameter Heavy Duty Felt Pads - 144 Pcs (4 Pcs/Pad) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

1 1/2

Limited Offer Today!! 1 1/2" Diameter Heavy Duty Felt Pads - 144 Pcs (4 Pcs/Pad) Black Friday and Cyber Monday 2011 Deals

Monopod Clamp Cr2 Camera Batteries Digital Compact Camera

How to Sand and Seal Floorboards

We have been sanding and sealing, staining and restoring floors for over 10 years, although we would recommend that you use a professional to sand and seal your floor, you can do it yourself, if you follow this simple guide:

Felt Furniture Protectors

Preparation

Felt Furniture Protectors

It is the key to every job we do, if your prep is bad the finished job will be terrible, if prep is excellent the finished job will be outstanding.

The whole point of sanding and sealing is that you should be able to recreate a factory applied finish on site (at least that is what we aim to do).

Firstly you need to prepare your floor for sanding, you need to remove all nails from any gripper rods that were in-situe before, also any bits of carpet underlay that have become stuck to the floor. Once you have fully cleaned the area you need to check for any loose boards, if you find any lift them up fully to check for pipes underneath, then, using cut nails 1 ½ to 2 inch, nail them back down carefully. Then set all the nails in by at least 3mm using a centre punch and hammer, this will increase the life of the sanding belt, and limit and damage to the drum.

Sanding

You are now ready to start sanding; you should start with a 36 grit belt or 40 Grit (depending on the state of the boards). Sand in the direction of the boards, never work diagonally or across them as this will put scores marks in that will take forever to remove. If you are using a Hiretech HT8 then you will need to be very careful, as these machines are really light and they tend to jump and skip over the boards rather than sand them. When sanding never leave the machine in one place for more than 2 seconds as it will create burn marks in the board that are impossible to remove. Rather keep the sander moving at all times and let the roller gently coast on the floor.

We use (and hire out) a Bona Flexidrum, this has a continuous belt on a rubber drum, the belt just slides on, no need for metal bars and screws as on the HT8. It weighs around 60kg (very heavy) and has a 2.2kw motor, it is incredibly fast at removing material and is 98% dust free; it always leaves a beautiful finish.

The 36 or 40 grit should be used until all of the boards are sanded back to bare wood, if the boards are particularly curved you could use a small sander to get the very edges of the boards cleaned up. Once you are back to bare wood you can start working through the other grades, don't be tempted to skip grades you must work through them all - 60, 80, 100, 120 grit. Once you have sanded to 100 grit you should start sanding the edges, again keep the sander moving at all times, start with the most coarse disc and work to the finest (80 grit). After the edges are done, do the corners and around any pipes with a detail sander 40 to 60 grit (no need to go any finer it's a very small area). After all this is done its time to do the final pass with the 120 grit belt, before running a random orbital sander around the edges (60 working to 100 grit). The final pass should be no more than twice in each direction, you're not trying to remove material but just giving a final light sand. With this part done now your onto the final stage (at last)....go around the whole room with a random orbital sander, sand out any score marks or swirls that are in the boards, start at 60 grit, then 80 and finish with 100 or 120.

I know this all sounds very long winded, but trust me if you put the preparation in you will be rewarded when it comes to applying the finish.

Staining

If you are going to stain the floor you obviously need to do it before the seal is applied. We recommend the use of a solvent based stain that can be lacquered over. We use Bona Décor. We apply this stain with a rag in a circular motion, working the stain into the boards; you must make sure that all the stain is fully rubbed in with no 'wet looking patches'. Once you have done this the stain needs to dry for 24-48hrs before applying your primer coat.

Most stains that are oil based cannot be lacquered over; instead a top coat of oil is applied after the stain. We have in the past used spirit based stains; however these can be notoriously difficult to apply evenly, especially on woods that are porous like beech. If you are using a spirit based stain you have to work very quickly and always keep a 'wet edge', on porous woods the stain should be diluted with white spirit so that it can be applied more evenly.

Sealing

You're now ready to seal the floor, so firstly fully vacuum it off ensuring that there is no dust of any kind on the floor. We always recommend the use of a base coat primer such as Bona Prime Intense or Prime Classic. A primer stops any side bonding, this is when the floor expands and rather than each block moving individually, they more as a section creating a shear line in the pattern (herringbone block). A primer enables the floor to move under the lacquer (the primer has elastic type qualities) avoiding any cracks from side bonding. This is obviously very important on any parquet or herringbone floors, not so important for floor boards but it is still good practice, as it is an extra layer of protection and aids adhesion of the top coat.

Firstly shake the bottle of lacquer well for one minute, then using the filter provided, decant it into your roller tray. Brush all the edges of the floor first using a fine bristled paint brush, making sure to cover all corners and come about 4 inches of the wall. There is no need to wait for this to dry you can carry straight on with covering the rest of the floor.

We apply the lacquer with a roller, again from Bona, don't be tempted to use a paint roller, the lacquer roller that Bona make are guaranteed to give an orange peel free finish without dropping any pile.

When you have covered the entire floor, and checked that you have not over applied in any areas (this can be seen by a blue looking film on the surface) leave it to dry for 2 to 3 hours. You have a choice now, you can either nib the lacquer back with a buffing machine or not, if you don't you will get a rougher grippier finish than if you nibbed it back.

If you go down the buffing route then you need to use the buffer on the slowest speed with a maroon pad and a scrad wing (a small sanding sheet that sticks to the maroon pad). Work over the floor quickly keeping the sander moving all the time, if you stay in one place to long you will rip through the primer.

After this, vacuum the floor again to ensures a dust free surface, then apply the lacquer in exactly the same way as you applied the primer, leave to dry for 3-4 hours then repeat for the final coat. The floor will need two top coats, making three in total, if you buffed the primer the first time round then you need to do the same with the first coat of lacquer. Do not buff the top coat; it should be pretty smooth if you buffed the two previous coats.

So that's it! All done!

NB - Make sure you put felt pads on any furniture in the room as this will stop any scratches when moving furniture about.

Need to rent a floor sander in Farnborough?

How to Sand and Seal Floorboards
Felt Furniture Protectors

Black Friday Pro-Glides 1 1/8 Dark Brown (24 pc. pad set) Replacement Felt Assemblies" ***CLEARANCE*** 2011 Deals

Nov 21, 2011 11:27:20

Black Friday Pro-Glides 1 1/8 Dark Brown (24 pc. pad set) Replacement Felt Assemblies
Click for larger image and other views

Pro-Glides 1 1/8 Dark Brown (24 pc. pad set) Replacement Felt Assemblies

>> Click here to update Black Friday prices for Pro-Glides 1 1/8 Dark Brown (24 pc. pad set) Replacement Felt Assemblies" ***CLEARANCE*** <<

Black Friday Pro-Glides 1 1/8 Dark Brown (24 pc. pad set) Replacement Felt Assemblies" ***CLEARANCE*** Feature

  • 24 Full Sets, 24 Replacement Pad and 48 Shims for Angled Chair Legs
  • Pro-GlidesTM are a three component system consisting of a mounting base, retaining collar and replaceable felt assembly.
  • The base of the glide is designed to be permanently installed in a furniture leg and never have to be pulled-out again.
  • As the felt portion of the glide wears the consumer simply unscrews the retaining collar and pops-in a new felt assembly.
  • No hassle, no prying, no hammering, and no damage to furniture; simply use your fingers and seconds of your time and avoid scratches to your flooring surface.


Black Friday Pro-Glides 1 1/8 Dark Brown (24 pc. pad set) Replacement Felt Assemblies" ***CLEARANCE*** Overview

24 Full Sets, 24 Replacement Pad and 48 Shims for Angled Chair Legs. Pro-GlidesTM are a three component system consisting of a mounting base, retaining collar and replaceable felt assembly. The base of the glide is designed to be permanently installed in a furniture leg and never have to be pulled-out again. As the felt portion of the glide wears the consumer simply unscrews the retaining collar and pops-in a new felt assembly. No hassle, no prying, no hammering, and no damage to furniture; simply use your fingers and seconds of your time and avoid scratches to your flooring surface.



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Pro-Glides 1 1/8 Dark Brown (24 pc. pad set) Replacement Felt Assemblies" ***CLEARANCE*** ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Pro-Glides 1 1/8 Dark Brown (24 pc. pad set) Replacement Felt Assemblies

Limited Offer Today!! Pro-Glides 1 1/8 Dark Brown (24 pc. pad set) Replacement Felt Assemblies" ***CLEARANCE*** Black Friday and Cyber Monday 2011 Deals

Da Vinci Kalani Wooden Kitchen Bar Stools

How is Laminate Flooring Made and How Do I Protect My New Laminate Floor?

How is Laminate flooring made and how do I protect my new Laminate floor?

Felt Furniture Protectors

Laminate flooring has grown by leaps and bounds in a very short period of time. The reason behind the rapid laminate wood flooring growth is the ease of installing laminate flooring. This wood flooring system is a floating floor that has a laminate flooring underlayment on which the laminate floor lays over top of. Another benefit to having a laminate floor system is the durability of the floor. Laminate flooring manufacturers are using new technologies to create a very dense fiber wood core with a very durable top plastic coating.

Felt Furniture Protectors

Constructions of laminate floors

There are basically two types of laminate floor constructions. You have the direct pressure laminate and the high pressure laminate. The two different styles vary in the way they are attached to the core. The direct pressure process is a one step process where they fuse all the layers directly to the core all at the same time by using melamine resins and pressure and heat they are impregnated and together to form a very durable laminate plank flooring. The other high pressure laminate flooring is a two layer process. The first is that the craft paper style sheets will be glued together and using a print film, which is then glued to the core. Here everything is glued together and using high pressure they become very hard and durable.

What is available for Laminate flooring?

The laminate wood flooring is almost invincible to spills, stains, burns and a very high tolerance to scratches. Laminate flooring prices have such a wide range but can offer you just about any replicas of any wood species that you would desire. They will come in a few different varieties such as the single strip, two strips or even the three strips with micro beveled edges, square edges or just beveled edges. Depending on the quality you are looking for the top finishes and treatments will vary the price of the laminate wood flooring. Because these floors can imitate just about any flooring on the market, your choices for texture and looks give you an abundance of choices such as traditional stone, ceramic tiles and beautiful hardwood.

Caring for your Laminate floor

Laminate flooring is stain and fade along with scratch resistant and with a few preventive maintenance ways you can have your floor last a very long time. First you must follow the laminate flooring manufacturer's limitations and by keeping their recommendations in consideration you will have a floor that will last forever.

Your Maintenance and laminate wood flooring care

· Place designer mats in front of stoves and sinks along with all the room entrances

· Always have felt protectors under the feet of furniture

· Use chair coasters that are clean and working properly will help

· One of the biggest things you can do is to try and follow the laminate floor manufacturers recommendations for room temperature and what they recommend for humidity levels

Maintaining laminate flooring

Laminate flooring is very durable and not that hard to keep clean. All you have to do is regularly sweep or vacuum with a soft brush. Damp mop the laminate wood floor using a bit of ammonia or vinegar and water being careful not to flood the work panels as you can damage them this way. Some products that are not recommended for your laminate floor are soaps, scouring powder, floor polish or steel wool as these may damage the laminate wood flooring. Always test a product that you are unsure of in a low visible area. If you have to remove a stain use the recommended laminate floor cleaner and mop up to keep any water from entering the joints. Also make sure you use a damp mop and not a wet one.

How is Laminate Flooring Made and How Do I Protect My New Laminate Floor?
Felt Furniture Protectors

Metal Dish Racks Canon Lens 18

Storage Bag - Single Table Leaf (Grey) (30" x 52")

Black Friday Storage Bag - Single Table Leaf (Grey) (30" x 52") 2011 Deals

Nov 19, 2011 16:51:41

Black Friday Storage Bag - Single Table Leaf (Grey) (30
Click for larger image and other views

Storage Bag - Single Table Leaf (Grey) (30

>> Click here to update Black Friday prices for Storage Bag - Single Table Leaf (Grey) (30" x 52") <<

Black Friday Storage Bag - Single Table Leaf (Grey) (30" x 52") Feature

  • Color: Grey
  • Size: 30" x 52"
  • This table leaf strorage bag is made from a soft felt material.
  • Helps to keep your table leafs from scratching. Holds one leaf.
  • Bag includes a handle, which allows for easy carrying between dining and storage areas.


Black Friday Storage Bag - Single Table Leaf (Grey) (30" x 52") Overview

This table leaf strorage bag is made from a soft felt material, and helps to keep your leaf from scratching. Bag holds one table leaf and includes a handle, which allows for easy carrying between dining and storage areas. .



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Storage Bag - Single Table Leaf (Grey) (30" x 52") ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Storage Bag - Single Table Leaf (Grey) (30

Limited Offer Today!! Storage Bag - Single Table Leaf (Grey) (30" x 52") Black Friday and Cyber Monday 2011 Deals

Davinci Nursery Furniture

Slate Floor Cleaning

Slate can be an excellent choice for flooring, being extremely durable whilst being available in a variety of colors, shapes and textures. It is a fine grained homogeneous metamorphic rock which when professionally installed can give a sophisticated look and add to the ambience of any location.

Felt Furniture Protectors

Slate can be relatively easy to clean, but only if a number of steps are taken to keep the floor in good condition - which can, in itself, be a laborious task. It is important to remember that slate is a very porous substance, meaning that even after the application of a sealant; the floor can be stained by any spillages or even by a gradual buildup of stains, bacteria and soil deposits over time.

Felt Furniture Protectors

One can protect slate by taking care to remove shoes before walking on the surface, putting felt pads on any furniture in contact with the slate, sweeping the floor to remove all dust and dirt residue and cleaning any spillages immediately. However this can be a task which is easily overlooked and this is where the problems occur.

Taking a quick look at the soles of your shoes will reveal reasons as to why slate floors can become dirty and stained over time. The soles of our shoes have particles of sand or dirt picked up from our everyday lives, and it is these particles that grind and cause abrasions and tiny surface scratching - which leads to a gradual change in appearance.

By the time any staining becomes visible and noticeable, layers of stains and bacteria have built up which leads to the traditional methods of cleaning, and the chemicals used, becoming ineffective. It is at this time you may need to consider the use of a professional slate floor cleaning company which can restore heavily soiled slate to its original state.

Once the floor has been cleaned and restored the next step is to consider its ongoing maintenance. As previously mentioned, if due care isn't taken slate can quickly become soiled again, and professional companies use a water based sealer which will offer ongoing protection for your slate floor, and will facilitate easier and more effective future cleaning.

Slate Floor Cleaning
Felt Furniture Protectors

Black Friday Dining Room Set - 20 Pcs Heavy Duty Felt Pads 2011 Deals

Nov 18, 2011 19:34:13

Black Friday Dining Room Set - 20 Pcs Heavy Duty Felt Pads Deals
Click for larger image and other views

Dining Room Set - 20 Pcs Heavy Duty Felt Pads

>> Click here to update Black Friday prices for Dining Room Set - 20 Pcs Heavy Duty Felt Pads <<

Black Friday Dining Room Set - 20 Pcs Heavy Duty Felt Pads Feature

  • 1 1/2 inch diameter (4 pieces) and 1 inch diameter (16 pieces)
  • Self-adhesive & non-abrasive
  • Portect your floors, countertops & furniture surface
  • Scratch protection, noise & vibration reduction
  • Package of 20 pieces


Black Friday Dining Room Set - 20 Pcs Heavy Duty Felt Pads Overview

Made of 100% polyester felt, The Felt Store's Heavy Duty Felt Pads are suitable for protecting hardwood floors, furniture and other surfaces from marks and scratches. The Dining Room Set includes 20 pieces of Heavy Duty Felt Pads which include 16: 1" diameter pads and 4: 1 ½" diameter pads. Each pad is 3/16" thick with adhesive backing and are readily placed on any surface for protection. Simply peel and adhere to your dining room chairs and table, protecting any hard floor surface.



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Dining Room Set - 20 Pcs Heavy Duty Felt Pads ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Dining Room Set - 20 Pcs Heavy Duty Felt Pads

Limited Offer Today!! Dining Room Set - 20 Pcs Heavy Duty Felt Pads Black Friday and Cyber Monday 2011 Deals

Graco Travel Crib Foot Rest Ottoman White Baby Crib

Owe More on Property Than it is Worth? - Ideas to Sell Rather Than Lose It

Fallon is a farming and ranching community about sixty miles east of Reno, NV. I went to school in Churchill County schools in Fallon, NV. The reason that I bring this up is to associate my upbringing with the way that I see life today. Those who know me well, know that I am a small town guy with big dreams. I am also sincere. I believe in fairness to all and have an affinity for honest, hardworking Americans, who are struggling with today's economic challenges.

Felt Furniture Protectors

One thing that I learned in the small town atmosphere is that you have to be fair to your neighbors and friends. We depended on each others hard work and honesty. If a neighbors cow got out we all chipped in to get her back in. If someone had a barn fire, we helped rebuild it. When we lost a member of our community, we all grieved. In some ways, the big cities have some of the same characteristics. I believe that small clicks called "neighborhoods" do watch out for one another.

Felt Furniture Protectors

I believe that my small town experiences led to my successes and my failures in the big city. Let me explain: When I left Fallon I went into the US Air Force. My AFSC was a 90250 which is a surgical assistant and PA. To make a long story short, I passed instruments during surgical procedures ranging from knee replacements to open heart surgery. During this time period I became proficient at OB-Gyn and birthing. I learned at that time how precious life was. I witnessed many living births as well as had the unfortunate experience of watching death. My desire was to become a surgeon and I continued on in school at BYU majoring in a preprofessional (medical) program. After leaving BYU, I returned to Las Vegas, NV. and went to work building a career. I was a single father raising my two sons (Leland and Adam). Adam spent more time with his mother than Leland. They both turned out to be excellent American citizens.

I took all of the skill sets of my young experiences and excelled in auto and real estate sales and investing. I started investing in real estate while in my early 20s and did quite well for a young man with no father in his life. My father died when I was 23. He was not a part of my life since I was about 8 years old. I did see him from time to time, but; it was mom who raised me. My first real estate purchase was a Las Vegas rambler about 2100 square foot VA foreclosure that I picked up for ,700. I sold it 45 days later for ,900. Most people would have loved to make that kind of money, as I did! There was only one problem that I had with the transaction. After closing on the property and receiving my 870 check at closing, I started to feel guilty. I felt guilty for the people who lost their home and felt guilty that I had just "Made a Killing" on the new owners. My guilt soon led to joy as I realized that I could have sold that home for 000. I realized that the new owner actually ended up with equity and that the lender got rid of "Bad Debt".

Making money has never been a problem for me, however; I have not always the best money manager in my own life and have had my ups and downs over the years. One thing that stands out the most to me in my career is the lessons of "Life's Hard Knocks!" I have experienced many failures and many successes and have watched others make many of the same mistakes that I have made. I believe that I have learned well from these experiences.

One of the greatest assets that I feel that God has blessed me with is the love of numbers and a good vision of problem solving. Anyone who has known me over the last 30 years can attest that I understand finances and financing as well as anyone in the country. I bring this up to share with you that what I am about to tell you is credible and it is true. This article is written in order to help individuals who may not know where to turn or what to do in their current situation. I do not have all the answers, nor; do I pretend to have them. I am merely asking you to continue to read this article to see if there may be an answer for you or someone that you know. I am not giving legal advice or financial council. I do recommend that you consult with your own financial advisor or attorney prior to entering into contracts or agreements with anyone or any company.

Let me begin by talking about a real estate or a vehicle purchase and tell you a few things regarding these transactions that you may or may not be aware of. First, and foremost, unless you have a buyer's agent in a transaction, you are not represented in that transaction. What this means in simple terms is that the seller is represented by the listing agent and the agents loyalty is bound to the seller, not you as the buyer. The same is true of the RV, boat, or auto salesman. They are 100% committed to selling you a car and getting as much profit as is possible from you, the buyer.

I am going to talk a little bit about the real estate transactions first and then we will address the auto or vehicle transaction next.

When you are negotiating to purchase real property, everything is NEGOTIABLE! Just remember that the name of the agent that is on the sign is the seller's agent, not yours! His or her job is to sell the property for the seller and sell it for the most amount of money possible and with the least amount of contingencies (conditions) on the offer to purchase contract. It is your right to have ANY offer submitted as you request. Too many times the listing agent bumps the buyer up or refuses to take an offer to the seller. It is his or her job to make every offer to purchase to the seller in a timely manner. The law requires that a listing agent presents your offer to the seller. Keep in mind during this offer negotiation that the average real estate commission in a transaction is about 6%. It is possible for a BUYER to negotiate part of the commission out of the deal in order to get what he needs to complete the transaction. In most cases it is best to have a buyer's agent represent you in the transaction. They are usually aware of these, as well as other items, that can be negotiated out of or into the deal. Things like personal property are usually not allowed in the financing of the home and most lenders cap the concession items at 00, or a small percentage of a sales price. Contingencies are things like furniture, big screen tv, swingsets, or other items that are considered personal property and are not permanently attached to the structure or the land.

Closing costs are usually negotiable with the seller, mortgage broker, and even sometimes with the agents and escrow company. Everyone is willing to take a small cut if it means the difference between a deal closing or falling apart. Make sure that you do your homework on your particular transaction "PRIOR" to closing. The wrong time to find out that you could have gotten a better deal is after you have closed your deal. If you do this one thing it could make a difference down the road if you ever need to sell.

By negotiating a skilled deal (a fair price and terms transaction) you have set yourself up to be in a more liquid position when you do sell. Every real estate deal should be met with an exit strategy prior to closing. What I mean by this is what happens if you have to sell at a future period of time? For example if you buy at the top of the market's value today and the property declines in value by 10% more in the next two years and you are forced to sell, what is your exit strategy? Compare this scenario to buying your property at a 90% of fair market value today and then having to liquidate in two years for a 10% reduction off market value, your position would be good.

If you do find yourself upside down in your home and you do not have a way out, there are many options for you. There are do it yourself training kits available for short sales and loan modification. You may be able to stall or forego a foreclosure on your home or other property by using short sales techniques or by obtaining a government loan modification. A short sale is selling a property or vehicle for less than the loan balance in order to obtain a lien release and a free and clear title. Some lenders are willing to negotiate the transaction in order to alleviate the foreclosure or repossession fees and processes. A lender reduces a negative portfolio by negotiating a settlement offer with you as the seller in order for you to dispose or liquidate your property in the event of a financial hardship. The government has set up many plans in order to stimulate the lender to re-negotiate on your behalf.

Now let's address automobiles briefly and then summarize both real and personal property liquidation and acquisition techniques.

When I was selling cars, I was a seasoned and skilled negotiator. Many times I would know what the customer was thinking before he or she ever responded. We were trained to look for buying signals and we are very skilled at overcoming objections and closing sales. We are commissioned to work for the dealer, not the customer. Our sole job is to sell as many cars as possible and for the highest profits. We are paid to get the most amount of money from you the buyer. A dealer has many ways of making that money. Even if he sells you a vehicle at invoice, there are many other profit centers available to him. One thing that is a huge profit center to many dealers are "add-ons" to the list price. Things like custom tires and wheels, desert protection packages, custom paint, alarm systems, paint or fabric protectors, and many other things that are added as dealer options. These are huge profit centers as they are nearly 100% pure profit in some cases. When I am buying a new car, I do not add to MSRP for aftermarket items. My negotiating start from MSRP! Most of the after market items that are listed on MSRP as an addendum give absolutely zero value in the NADA or Kelly Blue Book valuations. If you pay for these items upfront you will be in a worse position than if you had negotiated them out before closing and taking delivery of your new vehicle. Most people are also tricked as to the trade in value of their current vehicle. Dealers establish an ACV for your trade in and then show you a different value for trade allowance. For example if a dealer says that he is paying you 00 for you 2000 Malibu, his ACV may actually only be 00. He in essence buys your vehicle for 00 less than what you thought you were getting. He does this by keeping his sales price 00 higher than what he would have sold the new vehicle to you. Just remember, I am not against a dealer making a profit, I just want it to be a fair profit.

To keep it all in perspective, remember this: If our car dealers do not make a profit, they go out of business, creating higher unemployment and making it impossible to keep your new vehicle service and in good repair. Be fair to the dealer, while being fair to your future at the same time.

If you do find yourself upside down (owing more than your item is worth) and you do not know which way to turn, here are a few ideas to consider: Real Estate is different than autos, boats, and rvs. The title on real estate can pass from owner to owner without ever paying off existing loans and liens. When you sell a car or rv, you MUST payoff the lien in order to get a free and clear title. When you sell your home you can sell it own owner finance terms by executing a deed of some sort (this transfers title). What this means to a seller of real estate is that you do not have to sell to a buyer using conventional financing. A potential buyer may be willing to pay more than fair market value for your home just for the availability of full or partial owner financing or lease-option terms. You in reality become the bank. Doing this transaction could trigger what is known as a due on sale clause that could cause your lender to call your full balance due. Make sure that you consult with your attorney or a qualified real estate attorney prior to entering into this type of contract. If you are the buyer in a owner financed transaction make sure that you have not only had a title search done, have consulted legal advice, but; that you have also setup a contract collection company to fund the payments that you have scheduled. It is always better to use third party funding like a bank that will collect and disperse all payments including the impound accounts.

Owner financing is just one element of liquidating this type of asset. You may also proceed with short selling or loan modification.

Many people that owe more on their property than it is worth do not know how to obtain other equity in order to pay down their existing mortgages and financed loans. I believe that with a little reasearch we can all find a solution to our financial stresses! The key is to do something early enough in your financial difficulties to avoid your financial ruin.

Owe More on Property Than it is Worth? - Ideas to Sell Rather Than Lose It
Felt Furniture Protectors

Canvas Drawers Storage Davinci Convertible Crib Adjustable Shelf Hardware

White Oak Hardwood Flooring

White oak hardwood flooring is elegant, affordable, and highly durable. This type of flooring varies in appearance and colors that include light tan, dark brown heartwood, and natural sapwood. A straight grained hardwood that is manufactured to withstand heavy traffic, white oak flooring will bring stain resistant, long-lasting beauty to your home. White oak hardwood flooring will transform the rooms in your home from dull and colorless, to warm and rich.

Felt Furniture Protectors

The two categories for hardwood flooring are number one Common Grade, and number two Common Grade. Number one Common Grade hardwoods have more variations in color and appearance than clear or select woods. Number two Common Grade wood highlights the appearance of the wood's natural characteristics such as color, wormholes, and knots.

Felt Furniture Protectors

Wood plank flooring is a classic design that is widely used in homes, churches, legal offices, and many other structures. Premium quality wood plank flooring can be found in a variety of popular styles in hardwood and softwood grades. Some popular types of woods for plank floors are oak, pine, and hickory.

Floors made from wood plank or white oak hardwood are easy to clean and maintain, a few simple steps will keep them looking beautiful for years to come. Never clean your wood floors with soapy, hot water. This increases the floor's aging process, and the wood will split or crack. Place protector pads made from felt on the legs of furniture to avoid scratches, and use area rugs with grid pattern or mesh padding.

Hardwood or plank flooring is not recommended for bathroom installations. The bathroom's high level of moisture is an unsuitable condition for these types of floors. White oak hardwood flooring in the bathroom requires extensive cleaning and care on a regular basis. As the wood flooring ages it may become discolored, warped, or cracked.

White Oak Hardwood Flooring
Felt Furniture Protectors

Black Friday Light Duty Cork Protector Pads - 46 Pcs 2011 Deals

Nov 17, 2011 01:01:04

Black Friday Light Duty Cork Protector Pads - 46 Pcs Deals
Click for larger image and other views

Light Duty Cork Protector Pads - 46 Pcs

>> Click here to update Black Friday prices for Light Duty Cork Protector Pads - 46 Pcs <<

Black Friday Light Duty Cork Protector Pads - 46 Pcs Feature

  • Self-Adhesive Backing
  • Protect Your Cupboards Drawers And Cabinets
  • Sticks To Any Hard Surface
  • 46 Pieces per sheet
  • 10 Sheets in a package


Black Friday Light Duty Cork Protector Pads - 46 Pcs Overview

These Light Duty Felt Protector Pads are perfect for protecting your cupboards, drawers, cabinets, floors, counters, appliances etc. The self-adhesive backing makes applying fast and easy. Our Light Duty Pads are the perfect solution for protecting your furniture from scratches and dents while reducing noise and eliminating vibration. Sticks to any hard surface including wood, laminate, ceramic, vinyl and hardwood floors. Content includes 1 sheet of 46 felt pads that are 1/16" thick.



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Light Duty Cork Protector Pads - 46 Pcs ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Light Duty Cork Protector Pads - 46 Pcs

Limited Offer Today!! Light Duty Cork Protector Pads - 46 Pcs Black Friday and Cyber Monday 2011 Deals

Lcd Screen Cleaner

Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More

Black Friday Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More 2011 Deals

Nov 16, 2011 03:45:14

Black Friday Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More Deals
Click for larger image and other views

Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More

>> Click here to update Black Friday prices for Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More <<

Black Friday Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More Feature

  • Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More
  • Assorted Sizes From 3/4"- 1./4" in Diameter Approx.
  • Use on Bottom of Furniture or Displays to Prevent Scratching
  • Use on Chair Feet For Easy & Quiet Sliding


Black Friday Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More Overview

Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More

Limited Offer Today!! Package of 220 Quick Stick Felt Dots- For Furniture, Crafts, Displays and More Black Friday and Cyber Monday 2011 Deals

Nikon Lenses 55-200 Vr

Magic Sliders Magic Slider 22MM/Nail

Black Friday Magic Sliders Magic Slider 22MM/Nail 2011 Deals

Nov 15, 2011 06:21:10

Black Friday Magic Sliders Magic Slider 22MM/Nail Deals
Click for larger image and other views

Magic Sliders Magic Slider 22MM/Nail

>> Click here to update Black Friday prices for Magic Sliders Magic Slider 22MM/Nail <<

Black Friday Magic Sliders Magic Slider 22MM/Nail Feature

  • Teflon sliding discs rated to move up to 1 lbs.
  • For all small wooden leg furniture
  • 7/8" Diameter
  • Contains 8 discs
  • Works on wood floors, linoleum, ceramic tile, carpeting


Black Friday Magic Sliders Magic Slider 22MM/Nail Overview

Move chairs back from the dining room table without scraping your hardwood floor! Move your dresser easily across your bedroom carpeting without pulling your back out!



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Magic Sliders Magic Slider 22MM/Nail ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Magic Sliders Magic Slider 22MM/Nail

Limited Offer Today!! Magic Sliders Magic Slider 22MM/Nail Black Friday and Cyber Monday 2011 Deals

Counter Stools White Oak Bookcase Wall Ledge Shelf

Caught in a Severe Storm While Walking - How I Survived!

Walking in the rain

Felt Furniture Protectors

Walking in the rain the stuff romantic songs are made of and it is ok if only your joggers (shoes) get wet and the only stress is you have one pair. End result no walking tomorrow or until they are dry.

Felt Furniture Protectors

However walking in the rain can take on a whole new meaning when the rain is pounding on your back and the wind is taking your breath away. Oh did I mention the sand! There have been two occasions over the years where this has happened to me and it both cases I became very anxious about my surroundings.

What should I do?

The first instance was just on a beach walk, walking at North Palm Beach Gold Coast, the weather suddenly turned nasty. First up I just felt a little foolish walking on the beach soaking wet and looking like a drowned rat, pardon the expressions if you like rats (the four leg variety) and what were people saying as they sat in their beachfront properties dry and warm sipping a class of cold wine, looking at this fool caught in the rain, however those thoughts quickly disappeared.

Be prepared before hand

The real storm rolled in from the sea! Thunder, lightning and wind, I did not know what to do and panic set in, take shelter amongst the 'She Oaks" (trees) near the fitness camp and get struck by lightning, they are useless for protection anyway and you are not suppose to shelter beneath trees. The run up the beach towards vegetation was a fair hike, there were sand dunes and the tide was out it looked a long way off. Or stay on the beach and take my chances of being struck by lightning out in the open!

My instincts kicked in

Well I did what any normal person would do, I starting running. Have you ever run along a beach with the wind pushing against you, its hard work and throw into the mixed driving rain and stinging sand, thunder, which unnerves me at the best of times? The stories I heard as a child from my grandmother about 'God moving furniture around' never helped. I always preferred the scientific approach where there is smoke there is fire, (where there is thunder there is lightning) and I could not crouch low to the ground in this open area I was next to the powerful Pacific Ocean roaring and pounding on the shoreline like a hungry beast waiting to devour anyone that got close. Water and electricity do not mix kept thumping through my head. A metal picture of me in rubber shoes, rubber gloves and holding a wooden spoon to turn on a faulty light flashed in my head.

Pushing forward with tremulous effort was all I could do, I could not see for starters, what I really needed was a couple of mini windscreen wipers on my sunglasses; could not take them off because of the stinging sands and could not see with them on. What a dilemma! Thoughts of how ridiculous I must look started creeping back into my mind. Why would you even be concerned about your appearance when you think that you might die is beyond me. The mind just races into voids; it must be a survival technique to cope with your predicament.

Will I make it home?

The wind rain and sand were horrific yet I managed to push on and think nice thoughts, then suddenly everything stopped....no rain, no stinging sand and the wind was abating, nearly home thank goodness. Looked down at myself and I resembled a cinnamon doughnut, the front of me only was covered in a layer of sand, we are not just talking about a bit of sand sticking to my clothes they were heavy with the weight of it like a suit of armour. I looked like I had fallen face first into a vat of cinnamon sugar. (Sand in this case)

Well if there is a moral to be learnt from this story it is this, if you enjoy walking check the weather first and have a backup plan if you are caught in a severe storm. So what should I have done? Homes were only a few hundred metres away. The anxiety I felt while being caught in a storm and not being sure what to do concerned me, after all I was on a popular beach not in some isolated area.

Be prepared and know what to do

Research was the answer, to find out the correct procedure to follow and survive in the open during an electrical storm. It is had to believe how quickly the weather can turn ugly and you find yourself isolated and frightened although safety is only a short distance away.

Based on my interpretation of the information gathered, the best course of action for me in these particular circumstances would have been to make my way up to the low laying bushes near the sand dunes and stay put till the storm passed over. And adhere to the following;

1. Stay away from or do not shelter near any metal objects, aluminium fencing, garbage cans etc

2. Stay low to the ground, with your hands on your knees, however do not lie down.

3. Shelter near or under low shrubs, if there is not a building in sight, but don't shelter under tall trees.

4. If you feel the hairs on your arms or any exposed area start to stand on end this could indicate an imminent lightning strike!

In conclusion if you enjoy walking and like myself sometimes find yourself in another location or country prepare before hand, find out what you should do. 'Weather events' are having an enormous effect on our lives today; we need to be more aware of our surroundings and savvy about what to do if the weather turns ugly.

See you on my next walk

Caught in a Severe Storm While Walking - How I Survived!
Felt Furniture Protectors

Black Friday Light Duty Non Slip Rubber Protector Pads - 46 Pcs 2011 Deals

Nov 14, 2011 09:00:15

Black Friday Light Duty Non Slip Rubber Protector Pads - 46 Pcs Deals
Click for larger image and other views

Light Duty Non Slip Rubber Protector Pads - 46 Pcs

>> Click here to update Black Friday prices for Light Duty Non Slip Rubber Protector Pads - 46 Pcs <<

Black Friday Light Duty Non Slip Rubber Protector Pads - 46 Pcs Feature

  • Self-Adhesive Backing
  • Protect Your Cupboards Drawers And Cabinets
  • Sticks To Any Hard Surface
  • 46 Pieces per sheet
  • 10 Sheets in a package


Black Friday Light Duty Non Slip Rubber Protector Pads - 46 Pcs Overview

These Light Duty Felt Protector Pads are perfect for protecting your cupboards, drawers, cabinets, floors, counters, appliances etc. The self-adhesive backing makes applying fast and easy. Our Light Duty Pads are the perfect solution for protecting your furniture from scratches and dents while reducing noise and eliminating vibration. Sticks to any hard surface including wood, laminate, ceramic, vinyl and hardwood floors. Content includes 1 sheet of 46 felt pads that are 1/16" thick.



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Light Duty Non Slip Rubber Protector Pads - 46 Pcs ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Light Duty Non Slip Rubber Protector Pads - 46 Pcs

Limited Offer Today!! Light Duty Non Slip Rubber Protector Pads - 46 Pcs Black Friday and Cyber Monday 2011 Deals

Hanging Wall Bookshelves Glass Shelf Supports

10 Tips for Keeping Your Ceramic Tiles Looking Great

You enter the bathroom. You turn on the lights. You dream of having a nice, relaxing bath or a cold, invigorating shower. What you get instead is a strangled shriek and despair.

Felt Furniture Protectors

Yes, ceramic tiles sure brighten up any bathroom or kitchen with their artistic and wonderful designs. We all love that glossy finish and the pearl-like shine. But moldy and dirty ceramic tiles are a big turn off, especially to those who have a fetish about bathing in a spotlessly clean bathroom.

Felt Furniture Protectors

What about your kitchen? Can you bear placing your food atop a surface that looks dubious? Can you imagine the germs sticking themselves to your favorite vegetable? Ewww...

Alas, help from professional cleaners may cost us hundreds to thousands of dollars. That money can be better spent on other worthwhile items. All we need to know is how to properly care for our ceramic tiles so they'll keep looking clean and brand new.

1. Wipe 'Em Daily

Keep this as a mantra to yourself. This is easy enough to do, especially on kitchen counters, and it won't take you more than 15 minutes. All you need is a wiping cloth and some water. Always wipe surfaces after use. This is the best method from keeping dirt and debris from piling up. Dry tiles with a cloth or a sponge to prevent mildew formation.

2. Felt and Pads

Do you have heavy furniture made of wood, metal, aluminum or even plastic? Try to place felt or similar pads to their legs. This will help reduce the wear and tear on the tiles and will also facilitate easier shuffling and movement.

3. Protection with Mats

All houses have spots where heavy pivoting occurs. This could be your doorstep, or in front of the kitchen sink or the bathroom door. Situate mats of good quality to protect your tiles from pressure, weight or friction. These mats can also reduce dirt, grit, sand and oil that is deposited in your tiles since the fibers of the mat trap them nicely.

Make sure to wash the mats every once in a while to remove the deposits. Replace worn mats if possible.

4. Weekly Appointments with the Damp Mop

Aside from the daily regimen of wiping them, your ceramic tiles can also benefit a great deal from mopping them with a solution of vinegar and water. Mix ½ cup of vinegar to a gallon or so of water and use this to mop your floor.

Let it sit for 5-10 minutes. Then mop the floor again with tap water to remove most of the vinegar and odor. The mild acidity of the vinegar will promote the death of mildew. Also, refrain from using soaps on the tiles as they will dull they surface.

5. Kiss Grime Away With Bleach

Ooh, your neighbor tracked his mud-soiled boots on your spotless white tiles. Even though you want to beat him up bad, you might want to hold in the urge because you need to act on that dirt, fast! Wipe off most of the dirt with a wet cloth. If there are stubborn streaks remaining on your beautiful tiles, it's time to bring out the bleach.

Add about half a liter of bleach to a bucketful of water. Make sure you have your rubber gloves on, since bleach is very harsh on the skin. Mop the floor with the solution and let it sit for 15-20 minutes. After that, try rinsing it with water.

If stains still remain, repeat the process until you get back your shiny, sparkly tile. Remember to wipe it dry with a clean cloth after the procedure.

6. Clean that grout!

Grout is the cemented space between your tiles. White tiles usually have a white grout and white grout is a breeding ground for mildew, molds and dirt.

If you already spot mild discolorations on your growth, it's time to mix about ¼ of a mild detergent to a bucketful of water. Splash some on the grout and let it sit for 5-10 minutes. After that, try scrubbing the grout with a soft cloth. The color should fade away quickly. Again, wipe your tiles with a dry cloth after the procedure.

7. Abrade me not

NEVER use abrasives and harsh soaps on your tiles. They reduce the shine and polish as well as make cracks and pits that would be a more ideal ground for dirt and grime to settle in. Use only mild soaps and detergents. Always dilute strong acids before using them on your tiles.

8. Can you hand me that toothbrush?

Stubborn dirt and grime in your grouts? Well it's time to give them a little push. This will involve getting down on you hands and knees but it's all worth it when you see your tiles looking like they're newly installed.

Again, make a mild detergent solution from ¼ cup of detergent to a bucketful of water. You can add a small amount of bleach if you want, but remember to protect your hands and knees. Let it sit for a few minutes.

After that, get a used toothbrush and start scrubbing your grout. Be careful not to damage the side of the tiles. The ugly dirt should give way even with only a little force. Rinse with water and wipe dry.

9. Stock on Drying Cloth and Sponges

You might have noticed that every procedure call for wiping your tiles dry. That's because there is no sense in performing the task yet leaving molds and mildew for a chance to attack. Remember that these organisms grow best in moist surroundings.

With all that cleaning going on, you'll get tired from washing and drying the same cloth everyday so stock up for convenience.

10. Be Patient.

The thing is, people look up handy tips and tricks to cleaning their tiles. But some mail back, feeling very unsatisfied with the results. The usual problem here is PATIENCE. If a specific procedure tells you to wait for 15 minutes, it's best to follow it. See, waiting allows the solution to seep into the layers of dirt and grime. The solution loosens up impacted dirt and facilitates removal. This is the key to a successful cleaning venture.

With that said, have fun in cleaning and remember: Always wipe it dry.

10 Tips for Keeping Your Ceramic Tiles Looking Great
Felt Furniture Protectors

Black Friday Magic Sliders Magic Slider 22MM/Nail 2011 Deals

Nov 13, 2011 11:38:16

Black Friday Magic Sliders Magic Slider 22MM/Nail Deals
Click for larger image and other views

Magic Sliders Magic Slider 22MM/Nail

>> Click here to update Black Friday prices for Magic Sliders Magic Slider 22MM/Nail <<

Black Friday Magic Sliders Magic Slider 22MM/Nail Feature

  • Teflon sliding discs rated to move up to 1 lbs.
  • For all small wooden leg furniture
  • 7/8" Diameter
  • Contains 8 discs
  • Works on wood floors, linoleum, ceramic tile, carpeting


Black Friday Magic Sliders Magic Slider 22MM/Nail Overview

Move chairs back from the dining room table without scraping your hardwood floor! Move your dresser easily across your bedroom carpeting without pulling your back out!



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Magic Sliders Magic Slider 22MM/Nail ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Magic Sliders Magic Slider 22MM/Nail

Limited Offer Today!! Magic Sliders Magic Slider 22MM/Nail Black Friday and Cyber Monday 2011 Deals

Sony Refurbished Cameras Twin Size Mattress

Rebuilding Trust in Turbulent Times

Nearly every week I read something in a business publication about low employee morale, fear in the workplace, the toll change is taking on organizations, lack of management communication, the stress of having to do more with less, and other issues of general dispiritedness in the workplace. More and more, we are seeing that the cutbacks and reorganizations of the last few years have slowly eroded any level of trust employees may have had in their management team, their own sense of value and job security, and even society in general. What are some ways we can rebuild that trust in our organizations?

Felt Furniture Protectors

First, stop reading this article and write down two basic beliefs you have about people and human nature:

Felt Furniture Protectors

1. _____________________________

2. _____________________________

We will come back to these beliefs later in the article.

"Trust" as a verb is defined in Webster's New World Dictionary as "1 a) to believe in the honesty, integrity, justice, etc., of; have confidence in b) to rely or depend on (trust him to be on time) 2. to commit; entrust (to a person) 3. to put something confidently in the charge of (to trust a lawyer with one's case) 4. to allow to do something without fear of the outcome 5. to believe or suppose 6. to expect confidently; hope." Not all of these definitions of trust are applicable in today's workplace; however, we need to examine what aspects of trust we CAN rebuild within the new business fabric which is emerging.

Trust is built on relationships, and these relationships are based on emotions or feelings: confidence, honesty, integrity, justice, beliefs, hope. In all my books and speeches, I use an interaction model to illustrate the choices we have in every interaction and to illuminate what is happening in organizations today.

This model demonstrates that in any interaction there are two levels: the Business level: systems, processes, information necessary to meet the person's external objectives, and the Human level: the feelings and emotions the person has in that interaction. As we think about rebuilding trust, it becomes clear that trust can only be rebuilt if the Human level is taken into consideration. Let's consider the implications of this for organizations.

Many organizations today are trying to rebuild trust by simply focusing on systems and processes--better performance measures, more equitable benefits, and cross training for employees. Certainly these updated processes and procedures are important; however, trust will only be rebuilt if feelings and emotions are taken into consideration, and ongoing relationships are created.

A recent Roper poll found employee morale and job satisfaction at the lowest point since the poll began decades ago. Employer's lack of attention has created employees who are disheartened and skeptical. To retain valuable employees, management must find new ways to regenerate the spirits of creativity, commitment, self-worth, purpose, and even fun in today's workplaces, and, above all, must rebuild employee trust. Only then will our organizations survive and thrive.

In a very recent, extensive 18-month study on work-life issues conducted by Deerfield-based health-care giant Baxter International, Inc., the variable employees valued most deeply was being respected as a "whole" person with a life beyond work. Being respected as a human being and not just a pair of hands involves a relationship, and that, in turn, builds trust. Sirota Consulting, a New York-based management consulting firm, asked some 4000 employees of a company what matters most to them on the job. The answer? Job satisfaction. When pay satisfaction (Business level) rated poorly but job satisfaction (Human level) remained high, only 6 percent of the employees intended to leave.

Kenneth Kovach in Employment Relations Today Vol.22, No.2 discusses a study conducted in 1946, 1981, and1995, in which employees were asked to list ten common work place rewards in order of their motivational impact. Every year the results have been the same. The top three things employees want are:

- Interesting work
- Full appreciation for the work they've done and
- A feeling of being "in" on things

These motivators form the basis for the regeneration of spirit and trust, and notice that they are all based on the Human level. In order for a manager to help an employee find interesting work, he must know the employee well enough to know what is interesting to that individual. Appreciation based on specific tasks and outcomes makes each individual feel valued and important. In fact, employees will do almost anything for a manager who appreciates their work! It is interesting that employees want to "FEEL" in on things. Sometimes management thinks they have communicated something and included employees, but when employees are asked, they have an entirely different feeling. I believe every manager should have these results posted in his or her office as a constant reminder of what their employees are seeking. If, in fact, these needs were met daily, employees would be freed up to take control of their own careers and yet still trust in the integrity of the organization.

Let's look at some concrete ways HR professionals can help rebuild trust. In my book CARE Packages for the Workplace--Dozens of Little Things You Can Do to Regenerate Spirit at Work (McGraw-Hill, 1996) I have used the acronym CARE to demonstrate the elements of a spirited, trusting workplace.

C = CREATIVE COMMUNICATION
One of the ways to rebuild trust is to make sure employees feel that they are "in on things," and the best way to do that is to use all kinds of different, creative communication techniques so that you not only get employees' attention but you also let them know that you are taking a new, fresh approach to including them, that things really are going to be handled differently. Here are some guidelines:

1. Be honest. Tell employees everything you possibly can, including even bad news. Over and over again, employees are saying, "Tell us the truth, even the bad news. We can handle it. What we can't handle is the fear and uncertainty of not knowing." Above all, NEVER EVER LIE TO EMPLOYEES. If you don't have an answer or cannot share information, tell them the truth and let them know the reasons why you aren't able to tell them and when you may be able to give them the answer.

When a local company went public recently, the CEO made sure they communicated even when they "couldn't" communicate. When things had to be kept secret by law, he called meetings to explain the reasons why they couldn't tell employees more, and he prepared them for what they would see so that when private meetings were held, they weren't afraid. He anticipated their concerns and responded to events like stock fluctuations immediately with either a corporate wide e-mail message or voice mail message explaining what was happening. This CEO built trust during a time when trust could easily have been lost. Remember the definition of trust? "1. a) To believe in the honesty, integrity, justice of; to have confidence in." He was honest with his employees so they trusted him.

2. Be open. Let employees know what is going on in the company financially. Not only will this build trust, but you can use it to educate employees as well. Imagine the impact on trust and teamwork if all employees could understand an annual report or balance sheet! Many cutting edge organizations are beginning to practice "Open Book Management." In order to rebuild trust, employees must be free to ask questions and to contribute their opinions and feelings. You might even invite a frontline person to attend each senior management meeting.

3. Be human. Not only is it important to give information (Business level), but it is even more important to be aware of HOW you give the information (Human level). If you are giving bad news, keep the feelings of your audience in mind, and don't be afraid to let your own feelings show. Above all, be willing to admit your mistakes and share what you've learned from them. A manager who can say, "I made a mistake, and I'm sorry" either as an individual or as a company will build immediate rapport. This creates a relationship and a trust that will hold through many dark times. Trust definition "b) to rely or depend on" (trust that this person will tell you the truth in a caring way).

4. Be enthusiastic. Employees today desperately need a new sense of purpose and hope. Believe in them and their value as well as in the mission of your organization and share this in your communications. Samuel Ullman said, "Year may wrinkle the skin, but to give up enthusiasm wrinkles the soul." Trust definition "6. to expect confidently; hope."

A = ATMOSPHERE and APPRECIATION FOR ALL
Create an atmosphere in which it is acceptable to have some fun. With the increased stress in our workplaces today, a little fun is vital to the health and productivity of an organization as a way to break the tension and to enjoy one another. The CFO of a company made it a point at some time before the end of each day to walk through all the suites the company occupied. He talked with employees, joked with them, and asked them how he could help. His simple action helped to create an atmosphere of informality and trust in that organization.

Make a point of appreciating people for good work, even if it is part of their job. Stephen Covey speaks of the "Emotional Bank Account:" each day in our work we get deposits and withdrawals. Whenever you appreciate an employee, you are giving him/her a deposit. Only employees with something in their emotional bank accounts will be able to do their best work!

Be consistent. Whether you are rewarding or coaching an employee, it is important to have consistent guidelines in order to rebuild trust. The most secure employee knows exactly what is expected of him or her and when they have exceeded or failed that expectation. Appreciation when they have met or exceeded expectations and consequences when they have not will build a new level of trust.

R = RESPECT and REASON FOR BEING
Respect must be created through relationships--getting to know one another on both the business and the human levels. While one can respect an employee's ability and talents (Business level), it is even more important in building trust to respect the employee as a whole person (human level). Find ways for employees and managers to interact more informally and provide opportunities for employees to trade jobs, to shadow someone in another part of the company, and to participate in decision making. Practice what you preach. Don't say one thing and do another. If there are budget cuts and layoffs, don't buy new executive furniture. That action sends an incongruent message and will destroy what little trust is left.

Let employees know that you trust them. One of the ways you can do this is to examine the policies and procedures of the organization. Do they position managers as watchdogs and undermine trust? Often attendance policies, time sheets, and performance reviews reflect a basic attitude of distrust.

Nothing shows respect more than allowing people to be empowered to use their own best judgment. However, make sure that along with the permission you also give them protection when they goof. Use those goofs or "mis-takes" as coaching opportunities, not as times to beat up on the employee. The first time they goof and the way you handle it will determine if they ever risk making an empowered decision again. Trust definition "4. to allow to do something without fear of the outcome."

Treat employees the way you want them to treat your customers. The CEO of a company told a colleague recently, "I want the meetings I hold for my employees to be every bit as good as the ones I hold for my customers." He applied this in every detail--the location, the food, the lighting, the speakers, and even the sound system. Those employees felt valued and respected which, in turn, builds trust.

Help employees find a sense of purpose and importance in their work. Remind them that "they are the organization," and that they have choices in every interaction they have to create a positive experience for someone as well as a great reputation for the whole organization. Encourage employees to add a personal signature to their work, to find a way to put their special touch on the work they do. An airline pilot always writes 5 or 6 thank you notes to random customers on each flight to thank them for their business while a grocery bagger puts a "thought for the day" in each person's groceries he bags. This personal signature adds a new creative spirit and importance to their work which , in tuen, impacts the whole organization.

E = EMPATHY and ENTHUSIASM
Help all levels of your organization try to "walk in the other person's shoes" and to respect and honor differences. Daniel Goleman in his book Emotional Intelligence writes about his concern that many people today are spending more time in front of a computer screen than interacting with others, and as a result, many of them are either not experiencing or are forgetting the empathy that comes from sharing another's experience. Be an encourager, begin a "Kindness campaign," get employees involved with community projects, set up programs to involve employees' families, listen with your heart as well as with your head. Most importantly, provide your employees with as much training as possible on both business level and human level skills. As you do this, you not only build trust by showing that you value them but you also help them to take responsibility for their own careers.

Above all, HR professionals must keep hope alive in the organization. Celebrate anything you can and try to always focus on the good things that are happening. Encourage social gatherings and informal interactions of different levels in the organization such as support groups, discussion groups, and classes. One company randomly selects 10 employees a week to have lunch with each senior manager on Friday of that week until they have worked through the entire company. These interactions will create relationships which will help rebuild trust and confidence.

Hyler Bracy in his book Managing from the Heart says that all employees are crying out for the behaviors that make up the acronym "HEART:"

- Hear and understand me.
- Even if you disagree with me, please don't make me wrong,
- Acknowledge the greatness within me.
- Remember to look for my loving intentions.
- Tell me the truth with compassion.
- All of these requests fall on the human level and lead to caring, sharing relationships and the rebuilding of trust.

Now go back and look at the two beliefs you wrote down about people and human nature. Are they based on a positive or a negative perception of people? In order for our organizations to survive the turbulence of the 90's, we must return to a basic belief in the goodness of man, in man's innate desire to do meaningful work, and in the dignity, honor, and uniqueness of each human being. If your beliefs are negative, you will never be able to engender trust in your employees in the new business environment. However, beliefs can be changed, so if your focus is one of mistrust, you can choose to rebuild your own trust level. Then you can begin to rebuild the trust in your organization.

Rebuilding Trust in Turbulent Times
Felt Furniture Protectors

Nikon Digital Lens Black Ladder Bookcase

Luxury Apartment Living in Modern Suburban Communities

Like many of my generation, I left fast pace, aggressive city living for a kinder, gentler lifestyle in South Florida. I sought temporary living accommodations, because I was sure that my housing wants and needs would become more apparent and defined once I settled into the tropical lifestyle, assuming they didn't change altogether. So, I set out to rent an apartment from among South Florida's abundant supply of luxury apartment communities.

Felt Furniture Protectors

Once I had made my decision to move I was eager to find a place to live and allotted myself a week in which to accomplish the task. Before leaving for Florida, I started my groundwork and searched online using a variety of websites that cater to the needs of people relocating and seeking housing in Florida. After I arrived in Florida, I picked up a couple of free paperback guides at the local supermarket, which proved more useful than I ever would have imagined. Finding a new home was going to be a snap, I thought.

Felt Furniture Protectors

IF YOU DON'T KNOW WHAT YOU WANT, YOU WON'T FIND IT HERE.I quickly learned that sometimes too many options can be (almost) as frustrating as too few, and came down with an acute case of "analysis paralysis" trying to sift through the dozens of possibilities I had before me. Initially, all I really knew was that I needed a place to live and that I wanted it to be somewhere on Florida's Gold Coast, that vast region stretching from West Palm Beach south to the Florida Keys. With the Atlantic Ocean bordering the region to the east and the everglades to the west, I felt fortunate that my region of interest was fairly narrow, even if it had been longer than I would have preferred.

My next move was to buy a map of the region and select some criteria to focus my search and further limit my search area. Some considerations were more obvious than others were. For example, I knew I'd need a job and that, in my field, the prospects for finding one would dramatically increase with my proximity to the larger, denser urban areas of Ft. Lauderdale and Miami. However, I also knew that, with my luck, it was more than a possibility I'd land a job in less likely West Palm Beach and probably the day after the ink dried on my apartment lease in a community in the midst of one of those more prominent cities. I decided to hedge my bet and search within the nondescript area of Southern Palm Beach County-Northern Broward County, somewhat equidistant in space and time between the polar extremes of West Palm Beach and Miami.

In an attempt to further minimize my potential commutation time, I figured it might be a good idea to find a place near the region's two major north-south highways, I-95 and the Florida Turnpike. Seeing still too many options on my list, I knew that further limiting myself to moderately priced communities would be sure to eliminate both the high end and more affordable extremes. I soon discovered that seeking moderate pricing would also narrow the geographic scope of my search, as I would now be looking too cheap to be near the Atlantic Ocean, but expensive enough to avoid sleeping with the gators in the glades.

Although I had done my best to winnow my list, I still had too many communities to evaluate in detail within the week's deadline I had set for myself. I also knew that the kind of evaluation I needed to do would require more than a seat-of-the-pants review of the various apartment websites and paperback guides that I had at my disposal. It was time to get out in the field and kick a little dirt and wrestle with some bricks and mortar.

YOU CAN'T GET THERE FROM HERE. How hard could that be? I wondered. I had limited myself to a mere twenty-mile radius centered somewhere on Military Trail, between Boca Raton and Delray Beach, and I already possessed the complete addresses for all the communities I intended to visit. All I had to do was plan a logistically sensible itinerary, hop in my car and go take a look. As I started to plot each day's itinerary on my map, I realized that having an address offered little insight into a destination's location. After all, this was laid back Florida where residents come and go at a leisurely pace and show little concern about how long it takes to find their destination. Sure, South Florida has addresses, but no one abides by them, not even the mailmen. Around these parts, if you want to know where to go, you ask someone for directions, and get accustomed to hearing them in terms of mileage, number of traffic lights, or counting local landmarks like Winn-Dixies or Exxon stations.

I learned quickly that most street addresses are useless, especially those on streets that don't extend more that a couple of miles, or those on streets that change their names occasionally along the route. Adding to the confusion is the fact that every other town seems to have a road, street, avenue, or boulevard named "Atlantic" or "Ocean," or has street numbers and directional designations that from the perspective of passersby seem to emanate from some fictitious place. Streets that don't calibrate evenly like, for example, NE (Northeast) 47th street, followed immediately by NE 52nd street, and then NE 89th street are bad enough. But, when they intersect, say, SW (Southwest) 11th avenue, you start to wonder if you've found a new wrinkle in our universe's space-time continuum.

Many apartment communities just make matters worse by concocting their own "exclusive" street addresses specially designed to give their locations cache, even if they lack a spatial context. In reality, the addresses exist only on their own community site maps and usually relate to nothing more than a long driveway extending from public access roads to their front gates.

LOTS OF DATA, BUT NOT ENOUGH INFORMATION. Street address numbers are among the most heavily guarded secrets in Florida. Many places don't even bother to display them or display them so poorly that even a pair of eagle eyes and x-ray vision can't spot them modestly displayed behind palm trees, store signs, shopping center marquees and the like. Besides, in my experience, following address numbers are more likely to hinder than help. Sometimes they lull you into a false sense of security as you observe them ascending or descending toward your destination only to find them jump ahead or completely reverse direction when you pass from one town to the next.

After these revelations, I knew that nothing short of some serious old-fashioned dead reckoning was going to be required in order to find my way. That meant picking up a phone, calling leasing offices, and asking for specific driving directions to their apartment communities. In some cases, I literally had to simulate in my mind taking the actual trip by visualizing all its landmarks before ever leaving my driveway. Gone were the days when travel directions were a matter of pinpointing a major intersection near a destination on a map and then leaving the rest up to an organized grid of roads to get there.

As I approached the entrance of the first community on my list, I couldn't help feeling the sense of accomplishment I imagined Magellan had felt after circumnavigating the globe, albeit on a much, much smaller scale. However, I realized my celebration was pre-mature as I sat in my car outside the property's heavy metal gates trying to guess the magic words that would get me inside. I followed the instructions posted on the gates' sophisticated telephone directory system, but was denied access just the same. I ultimately ended up sneaking in behind a resident entering with an electronic key card. I learned during subsequent visits to these so-called secured, gated communities that sneaking in was part of the normal routine, which explains why none of the representatives I met at the various leasing offices I visited ever wondered how I got in without their assistance.

GOOD LEASING FOLKS CAN EASE THE PROCESS. I'm pleased to say that most of the leasing representatives I met at the more than two- dozen communities I visited that week were highly professional and efficient in discharging their obligation to enlighten me about their apartments. The really good ones cut to the chase and sized-up their offerings quickly. Many answered questions before I had asked them and usually with a few well chosen words and the aid of brochures, fact sheets and apartment floor plans and site maps. I was particularly glad when some representatives dispensed with filling out all the pre-application paperwork until after showing me their available units. As far as I was concerned, it was a complete waste of time for both of us unless and until I decided I wanted to live there.

DON'T BE FOOLED BY SMOKE AND MIRRORS. The fun part of the process was actually making inspections of the apartments. It was also the time I felt the need to start paying close attention to what I was doing. Some apartment communities will only show you model apartments they reserve specifically for that purpose, which are designed to help prospective tenants visualize living there. Needless to say, virtually all the models I saw looked brand new, tastefully furnished, and in much better condition than the apartments actually available to rent. And, except for giving a sense of the layout of a floor plan (and some communities have many) and how furniture might be arranged, models give little insight into the finish quality of the apartments actually available to new tenants. They also offer no sense of your neighbors or any other features that relate to the ambience of your apartment, such as its views or its exposure to light, air, and noise.

PRETEND YOU LIVE THERE. I learned quickly that the easiest way to become enthusiastic about or eliminate an apartment was to examine its layout, especially paying particular attention to room configurations, connecting walls and sight lines. If, for example, while standing at the front door, I was able to see all the bedroom and bathroom doors, I knew immediately I was ready to move on to the next apartment and hopefully one that would give the appearance (if not the reality) of more privacy. If layouts flowed logically with, say, kitchens situated near dining areas but separated from other living areas, I was satisfied and moved on to examining the rooms themselves.

During my inspections, I came to appreciate that room quality was not only a matter of size, but also shape and wall space considerations. Large rooms are great, but those with imaginative polygon shapes create odd angled corners that are difficult to utilize. In the same way, wall surfaces that are too encumbered with closets, windows and doors could make even rudimentary furniture placement a frustrating exercise.

The number and placement of doors and how well they separate living spaces was another consideration. For example, some master bathrooms have toilet closets, but no doors separating the shower/bath tub from bedrooms, which won't suffice if you're claustrophobic or finicky about not wanting shower humidity spreading throughout your home. Kitchens without doors can be troublesome too, unless adequate care has been taken to prevent cooking odors from wafting throughout the home.

While examining rooms, I took particular note of the number and spacing of electric outlets, and telephone and cable jacks available throughout an apartment. It came as no surprise that older properties do not usually cater well to today's space-age electrical, entertainment and telecommunications requirements.

SOME PRISONS HAVE MORE WINDOWS. Windows were by far the biggest disappointment I encountered in all apartments across the board. Generally, there aren't enough of them, they're small and rarely found in kitchens or bathrooms. To make matters worse, most (if not all) tended to be on one side of apartments. It amazes me that in a place like Florida with all its sunshine, clean air and pleasant climate (at least 6 months a year), more care isn't taken by architects and builders to optimize the use of windows in residential structures. Suffice it to say that fresh air cross ventilation is hard to come by in Florida, so get used to working your air conditioner hard, because you'll need it and every ceiling fan you can install to pump air through your home all day long, all year long. Another important factor about windows is simply the direction they face. For example, if you like it cool, you should select a northern exposure, or alternatively, if you'd rather bask in sunshine all day long, then a southern exposure will be to your liking. A preference for cool mornings or cool afternoons will translate into a preference for western and eastern exposures, respectively.

SO MUCH FOR AN OUTDOOR LIFESTYLE. Patios were my second biggest disappointment with Florida apartments, and for similar reasons as windows. In general, they're too small and confining to provide a relaxed, comfortable living experience. Most amazingly, few patios are screened-in to provide adequate protection from all those lower forms of life that seem to outnumber humans by many orders of magnitude, especially during the summer. In addition, surprisingly few have overhanging roofs or eaves to provide that little extra protection from sunshine and rain that at times can enhance the patio living experience. On the other hand, most patios have such poor views and overlook such noisy mechanical equipment that you probably won't want to spend any quality time out there anyway. Those of you who look forward to napping on the patio will best appreciate the importance of these seemingly nitpicky comments.

Among other factors, don't overlook the importance of elevation to the overall quality of the apartment living experience. Most of the apartment communities I visited charge a nominal rental premium for an upper floor apartment (approximately per month), probably because upper floor apartments don't have pesky noisy neighbors overhead throwing cigarette butts off their patios. They are also less likely to be flooded from rainstorms and tend to receive fewer visits from all those critters you'll find on your unscreened patios (ants, spiders, lizards, etc.) that Floridians have learned to coexist with. However, along with the superior views and access to light and air that upper floors provide is the excessive heat and possibility of leaks (on top floors). Upper floor units sometimes offer the amenity of a vaulted or cathedral ceiling that can enhance the light and air or feeling of spaciousness in an apartment.

DON'T BE TOO IMPRESSED WITH ALL THE SHINY GADGETS. During most of my apartment inspections, the leasing representatives did their best to talk around the aforementioned design flaws and tried to "sell" me on all the gadgets and labor saving conveniences that typically come with luxury apartments. Many apartments come equipped with washers and dryers (which I prefer to be installed in utility closets off the kitchen or outside on the patio, instead of adjacent to carpeted living areas). By the way, if washers and dryers aren't featured in an apartment, you better get a peek at your apartment community's on-site laundry facility. Many communities offer dishwashers, garbage disposals, oversized bathtubs, microwave ovens, refrigerators with icemakers, and one or more ceiling fans, in order to enhance the comfort of their apartments.

MAKE IT YOUR BUSINESS TO STRETCH YOUR LEGS. After touring apartments that met my basic criteria, I spent some time walking the communities to get a sense of their residents, a feel for their comfort and ambience and to inspect their amenities. Also, as I strolled I took particular note of how well properties appeared to be maintained. Although most luxury apartments will be up to snuff on the day you move in, even the newest and best built will require routine maintenance and repairs from time to time. Walking around may also give you some insight into the mindset and proficiency of the management and maintenance crew. If the common areas are well maintained (e.g., clean and recently painted, parking lots well paved, landscaping well groomed, and few signs of deferred maintenance), chances are better that the same philosophy and vigilance will apply to the upkeep of your apartment.

The best single place for a maintenance inspection is the pool and its surrounding lounge area, which usually is the most popular common area within a community. Most leasing tours for prospective tenants begin with a tour of the pool area, which is usually centrally located adjacent to the property's leasing and property management center. As a community's showcase, these areas are usually better maintained than other less visible areas. So, if the pool area needs a renovation, you should wonder how the rest of the property looks.

SWIMMING POOLS OR CEMENT PONDS? Even if the pool area is well maintained, you may not be all that impressed with the scale and scope of those facilities. Before I started my search it was inconceivable that I would find such woefully inadequate pool facilities in a place where sun bathing and swimming take place more than 300 days per year. In general, pools are small and shallow (barely 5 feet deep in some cases), not very well maintained and surrounded with only enough lounge chairs to accommodate 5% of their tenant population. Most of the places I visited had whirlpool spas, but some are barely larger than bath tubs, are not particularly well maintained, and are as likely to be out of service as they are to be operating on any given day of the week. Even more surprising is the fact that some brand new apartment communities I visited, which typically pride themselves on being loaded with recreational amenities, are not even bothering to build these all-popular whirlpool spas into their otherwise state-of-the-art properties.

DO-IT-YOURSELF TORTURE CHAMBERS. In most cases, health clubs are small, dark unfriendly spaces that suffer from a serious lack of cable TV entertainment and exterior light and views. If I had to use such facilities, I know I'd be even more eager than usual to finish my workout. Except for basic treadmills, stationary bicycles and free weights, the other equipment in some of these facilities looks as though it is borrowed from The Smithsonian. As for other forms of recreation, some apartment communities provide tennis courts, bicycle paths, basketball courts and kiddy playgrounds, but not necessarily in a state of repair you might consider inviting.

DON'T TAKE ANYTHING FOR GRANTED. After one inspection, I started to pay attention to some of the amenities I would normally take for granted, such as where and how tenants go about retrieving mail or disposing of garbage. Tenant mail facilities range from the expected (i.e., located near apartments, sheltered from the elements by a breeze way or some other structure) to the ridiculous (i.e., all huddled together in the middle of a parking lot completely unprotected from the rain and sunshine, and dangerously close to moving vehicles). You may not mind waiting for the rain to stop to pick up your mail, but you can rest assured the mailman isn't going to wait when he/she delivers it. If you live in one of those unfortunate places, you better have your mail delivered to a post office box, or get used to opening soggy mail.

As for the trash disposal, I resigned myself to the fact that the best I could expect would be having one large compactor and storage facility located near the exit of my community, regardless of how large an area that might be. The obvious advantage of such an arrangement is that tenants won't have to smell or look at garbage anywhere else within the community and won't have to be bothered by noisy garbage men carting it away in the wee morning hours. However, I'm still getting used to a routine of hopping in my car every time I need to dispose of trash or coordinating garbage runs with my daily travel schedule.

PEEK OVER THAT SECURITY GATE BEFORE SIGNING ON THE DOTTED LINE. Before registering a community on my short list of acceptable options, I made sure I drove completely around its periphery, and noted its proximity to public utility plants, highway interchanges, or some other equally undesirable land uses. In the process, I was sure to check out its neighborhood amenities, especially within a five-minute drive. Most appealing community locales were off main drags but near most of the daily conveniences I'd likely need, including supermarkets, restaurants, drug stores, banks, movies, etc.

Communities within 15 minutes of shopping centers, entertainment hubs and other desirable landmarks were placed high on my short list. As a contrast, some of the communities I visited were long hauls from commercial activity of any kind, and some were near special facilities I'd be more likely to visit on a monthly or annual basis, like Lowe's Home Improvements, Home Depot, furniture outlets, vacuum cleaner distributors, and so on.

FINAL OBSERVATIONS. I am pleased to report that I live in a community that provides a reasonable blend of the four major features I had sought from the outset: decent living accommodations (spacious, functional layout, with a view); basic community amenities (good swimming pool and safe, convenient access to personal mail boxes and trash disposal facilities); abundant neighborhood shopping opportunities; and good accessibility to major highways and regional employment centers. Best of all, I reside near the intersection of two important road arteries, which means visitors can find me on a map even using the most schematic maps of the region.

Over the course of my inspections, certain facts emerged as apparent truths. And, you should be aware that some of the foregoing comments apply to other areas of Florida and other types of housing (like condominiums and single family homes) as well as luxury apartment rentals. Readers are encouraged to verify similarities and differences across geographic areas and housing types based on their own experience.

Some general comments are worth noting. Notwithstanding the extreme volatility in residential real estate markets recently, Luxury garden-apartment-style communities in this area of South Florida still rent for .00 (give or take) per square foot per month. That means a 900 square foot apartment will rent for approximately 0 per month. Not surprisingly, one bedroom units have the highest per square foot rents; three bedroom units the lowest. Some communities charge extra for water, sewer and trash removal. Most charge a rental premium for certain apartment views (especially golf course or lake views), upper floor apartments and pets.

Newer doesn't always mean better and be aware that down here 10 years is considered old, if not a lifetime. Unlike other more traditional regions of the US, old residences down here are not considered classic, vintage, or quaint, but rather just plain obsolete and undesirable. However, as the expression goes, "they ain't building them like they used to" and if you want spacious, well proportioned, logical layouts you're going to have to look at the old stuff. The best compromise is to find an old unit that has recently been completely renovated and refurbished.

Age 55 plus communities cater to the seniors, but those without such designations don't necessarily cater to the young single adult population. In my experience, the only tangible difference between the tenancies of the two types is the existence of lots of toddlers and teenagers in the latter.

Like everything else in life, tradeoffs do exist in trying to find that perfect blend of apartment features. In South Florida, within a given price range, if you want to be near the Ocean, you're going to accept older, lesser accommodations. Newer properties tend to have more and better site amenities, such as pools, health clubs and tennis courts, but tend to be located farther away from regional employment centers and shops and facilities you'll need to visit daily, such as food stores, restaurants, drug stores, banks, etc.

Finally, if you want to enjoy fresh air, sunshine and truly experience the lifestyle that has fostered Florida's growth during the past several decades, you'll just have to go to the beach!

Luxury Apartment Living in Modern Suburban Communities
Felt Furniture Protectors

Black Friday EZ Moves HS - Hard Surface Felt Bottom Furniture Slides - 8"x5" (Set of 4) 2011 Deals

Nov 11, 2011 17:01:59

Black Friday EZ Moves HS - Hard Surface Felt Bottom Furniture Slides - 8
Click for larger image and other views

EZ Moves HS - Hard Surface Felt Bottom Furniture Slides - 8

>> Click here to update Black Friday prices for EZ Moves HS - Hard Surface Felt Bottom Furniture Slides - 8"x5" (Set of 4) <<

Black Friday EZ Moves HS - Hard Surface Felt Bottom Furniture Slides - 8"x5" (Set of 4) Feature

  • Great for moving refrigerators, sofas, entertainment centers, pianos, beds, bookcases, file cabinets and more.
  • Ideal for use on wood floors, ceramic tile, linoleum floors, laminate floors, finished concrete floors.
  • The felt bottom base glides on hard surface floors with ease.
  • Makes cleaning behind large items easy
  • Includes 4 furniture slides. Dimensions of each furniture slide are 8"x5" (LxW)


Black Friday EZ Moves HS - Hard Surface Felt Bottom Furniture Slides - 8"x5" (Set of 4) Overview

Hard Surface Furniture Slides allow one person to easily move all of your heavy furniture and more with ease. It Works great on any hardsurface flooring.Slightly tilt furniture and place a pad (foam side up) under each corner, then push or pull item to be moved. Furniture is gripped by the 1/2" thick EVA foam. The felt bottom base glides on hard surface floors with ease. Remove and store after each use using the included reusable plastic tie.Note: Make sure the floor is clean to prevent dirt or grit from damaging floor finsh. Remove and store after each use.



SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday EZ Moves HS - Hard Surface Felt Bottom Furniture Slides - 8"x5" (Set of 4) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

EZ Moves HS - Hard Surface Felt Bottom Furniture Slides - 8

Limited Offer Today!! EZ Moves HS - Hard Surface Felt Bottom Furniture Slides - 8"x5" (Set of 4) Black Friday and Cyber Monday 2011 Deals

Bassinet Mattress Sealy Posterpedic Toy Organizer Bin